AVR* Administrator
AVR* Administrator
Arne Rossius Tue 11 Nov 2014 02:14:43 PM UTC When programming the ATxmega256a3 with avrdude 6.1 (windows version), the extended address is not sent when jumping across a 128 KiB...
Stephan Schreiber Thu 25 May 2017 11:16:43 PM UTC Programmer hardware: AVROSP (Butterfly) Device type: ATXMega256A3(U) Using a black-box (client-provided) which is connected via Ft232R USB adapter, most likely ancient...
Rene Liebscher Sun 08 Jan 2012 05:18:52 PM UTC When running cppcheck the following findings are reported: ``` [avr.c:94]: (information) The scope of the variable 'r' can be reduced [avrftdi.c:368]:...
Alex Forencich Sun 16 May 2010 07:42:50 PM UTC The AVR109 butterfly protocol does not support access to the user signature row and the production signature row on XMega devices. ...
Johnny Quest Sat 18 Jun 2016 04:51:15 AM UTC Hello: First off, I have done my homework on this matter and would not have posted seeking assistance unless it was...
Thu 24 Mar 2016 12:32:46 PM UTC I tried using an AVRISPmkII in Windows 10 with avrdude 6.3, but libusb couldn't find the device ("avrdude.exe: usbdev_open(): did not find any...
Maarten van Eeuwijk Thu 07 Jan 2016 01:34:16 PM UTC avrdude version 6 series fails to write programs bigger than 131.072 bytes to flash on my atxmega256a3bu. Instead of continuing...
Sat 10 Feb 2018 04:38:09 PM UTC This patch adds the ability to reset FLIPv2 DFU devices after programming, by adding the "-e reset" command-line option. The command-line interface and...
Mike Brandon Mon 26 Jun 2017 08:13:10 PM UTC Programmer hardware: linuxgpio Device type: m2650 I have two different .hex files (unfortunately I am unable to share entire .hex files...
[email protected] Wed 19 Feb 2014 10:19:05 AM UTC Currently avrdude timeouts after about 3 seconds when not being able to program the AVR. I'd like to change this value to...