Álvaro Vázquez

Have you configured the Nokia Base Station with the correct SST:SD? It is requesting 1:0xffffff, that's the reason why you're seeing these messages.

And which SST:SD has UE configured?

5G android phones usually have default S-NSSAI and it cannot be changed, so you have to adapt your environment to that. In this case, your UE is requesting 1:0xffffff so...

In Android, you need Android 12 and a set of requirements to be capable of configuring Slicing: https://source.android.com/devices/tech/connect/5g-slicing?hl=en I tested with a Samsung Galaxy Tab S7+ 5G and Huawei Mate...

Yes, we have tested with Quectel modem but I don't remember exactly what tests we did regarding Network Slicing. Btw, you can configure all the options listed here: https://www.quectel.com/wp-content/uploads/2021/05/Quectel_RG50xQRM5xxQ_Series_AT_Commands_Manual_V1.2.pdf

Hi @ashmanpan , can you share how you deploy both open5gs and ueransim? To clarify, first you have to deploy open5gs. After that, you have to deploy ueransim changing in...

Hi @nitinbhat Everything you've used are with the default configuration? I'll check it next week. BR, Álvaro

Hi @avi-arora We have no experience deploying K8s on Windows, but it seems that your problem is related to CNI and/or Windows networking, and not to Helm Charts. Check anything...

Hi @kirankumar-Athirala I don't know what might be going on, but the first idea that comes to my mind is that the prometheus operator is just looking in the namespace...

Hi @anabel1012 Yes, I believe we'll upgrade it next week after testing the chart. Anyway, have you tried to change the image version through values.yaml? That could be a way...