avalori1

Hello @andrepuschmann I seem to still see this issue... I am running **~/srsLTE/srsepc$ srsenb --version --- Software Radio Systems LTE eNodeB --- Version 20.10.1** But strangely, can't get the version...

Hello @andrepuschmann , thanks for the quick reply. I forgot to activate the pcap... I have done it now for the future. Here are the .log if they are useful...

Dear @andrepuschmann do you need some more tests? I am happy to provide. No issues seems happening until there is a single UE connected... Cheers

Disclaimer: all the comments below come empirical observations and (almost) blind attempts, may not be technically correct, and I will be happy to be corrected if I am wrong (and...

@knbchse, which computer are you using? I realized the hard way that srsRAN is extremely computationally intensive... sometime "insufficient performance" comes very early. When you say "without GUI" do you...

@knbchse Even if Raspberry is in one of the suggested hardware setups, I suggest you start with a much more powerful computer (a fairly recent i5 at least) and work...

Dear Andre, Thanks for your reply! Some more details, including the results of the experiment you recommended: I was stimulating the traffic using iperf2 (but with the default TCP mode)...

Dear Andre, I followed your recommendations, and investigated deeper. I have noticed that also the ul_bler goes sometime very high... with one UE, and for a short time after adding...

Hi @taesokjoo, with a single UE I found the network to be EXTREMELY stable. The plot below is a test with RB=50 lasting about 68 hours (almost 3 days) where...

Hi @cristina-posada, did you manage to clarify this? Thanks