asylv-str comments

Results 6 comments of


                                            asylv-str

SPI reads all 1's (0xFF's) off of FT2232H

We are having a similar problem, using similar code, although we must admit we have not yet probed the device. We are using an FT2232 Mini Module to try and...

SPI reads all 1's (0xFF's) off of FT2232H

Hello, as we are still having issues, I am curious as to why this solved your problem. Why did you go the route of using `.create_from_url()` and `.open_mpsse_from_url()` methods? Shouldn't...

SPI reads all 1's (0xFF's) off of FT2232H

Following the same steps as @nickhdc33, I was unable to get a response (other than all F's), so I am not sure it is a universal workaround/fix.

SPI reads all 1's (0xFF's) off of FT2232H

With the FTDI2232 Mini Module, we are using a 10 MHz reference clock for both the slave devices. Is this what you are asking?

SPI reads all 1's (0xFF's) off of FT2232H

A couple of transceiver modules, found [here](https://www.atlantamicro.com/wp-content/uploads/2022/04/AM9018-Datasheet-Overview-Latest.pdf).

SPI reads all 1's (0xFF's) off of FT2232H

It turns out that the device we linked does not have wiring as specified in the pyftdi documentation. We only realized this once the manufacturer finally gave us schematics for...