arunprakash-avt

I request you to check if the controller port is USB 3. The performance of the Raspberry pi 4 controller is not so good. This could be the cause of...

I could not reproduce this error in an normal hardware. I just tested in Windows PC with Alvium 1800 U-158. I have configured the camera Device link throughput limit to...

Please check in vimba Viewer what is the value of DeviceLinkThroughputLimit, is it set to 380 Mbit/s. The frame rate depends on the exposure time, pixel format, DeviceLinkThroughputLimit and resolution.

Please find the DeviceLinkThroughputLimit as in the attached screenshot below 

In the above attached image Device Line Speed is the Maximum speed. Please set Device Link Throughput Limit value to the Device Line Speed to obtain higher fps.

From the above image I see that you are using GiGE camera. For further support and process we would like to add this issue to our ticket system. I request...

@AxeSie This issue is because your Auto Exposure is on or your camera is not configured properly. Can you please write us an email to [email protected].

Hi Klastine, after installing the VimbaUSBTL I would like to know if you have logged off the system and logged In? I request you to write us an email to...

I request you to write us an email to [email protected] , for our further support purpose.

Thanks for your question, please check the following Vimba Defective Pixel Manager and the user guide in the following link.[https://www.alliedvision.com/en/support/software-downloads/](url).