arag0re.eth
arag0re.eth
Hey, Thanks for the link didn’t know there was another guy working on something :) best regards Anton On 27. Mar 2020, 15:55 +0100, influenist , wrote: > @AntonidasTheFirst please...
@justcallmekoko i got the fimware running on the qt py esp32s2, where do i find the pinout part for rx/tx pins ?
> @arag0re Did You flashed with FZEasy or Spacehuhn Web? Did You build it form sources or You used already compiled version ? Mine gets flashed but I cannot get...
@xjazzfreakx Also setting up the Arduino-IDE beforehand is very important, like described [here](https://github.com/justcallmekoko/ESP32Marauder/wiki/arduino-ide-setup). Also u need to upload the Minimal SPIFFS stuff first and then use the regular "upload" second....
@xjazzfreakx yes i tested with the uart terminal on the flipper but no output there
@xjazzfreakx @pragamichele @justcallmekoko got a working version, not completly perfect but good enough. Will comment a link to the fork soon https://github.com/arag0re/ESP32Marauder
https://github.com/arag0re/ESP32Marauder
@xjazzfreakx @pragamichele
i think the "meta" in "applications\meta\application.fam" stands for any directory in "applications" like "external" or "main". But correct me if i am wrong.
I am using the built-in SD Card reader of the [macbook 18,3](https://support.apple.com/en-us/HT204384) from 2021