Robert Eckhoff

Here is two that I use. (dmesg copy and then formatted). ``` New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00 Product: Zooz_ZST10_700_Z-Wave_Stick --------------- New USB device found, idVendor=1a86, idProduct=55d4, bcdDevice=...

Take a look at the log in the opensmarthouse log viewer utility. https://opensmarthouse.org/utilities/logviewer/zwave/ Your devices are pounding the controller with reports every few milliseconds. Need to get that under control....

I don't know what to say. I'm not the maintainer, just try to help with the issues I can handle to help folks make progress. I did a 700 PR...

Out of curiosity have you tried changing the parameter to 254? That is the default for the device in the binding. The reason it may appear as -2 is explained...

The message indicates you changed to 255? Is that true? Anyway one more test; set the config to "0" and see what happens. I suspect it will work fine until...

The vast majority of these have been resolved. (This thread is over a year old and probably should have been closed). There is still an issue or two that pop...

The way OH works is each release is a snapshot in time and is not normally (only if severe security issue found) remodified/updates after the release. Your version is 3.3...

I tend to view the milestones as a better bet for stability. Plus there is a dedicated topic in the forum for milestone issues. The developers tend to cram a...

Just curious, have you tested this locally? There have been a couple of forum threads where aeotec series 7 zsticks have been purchased. I know the overall 700 issue is...

Thanks for that piece of information. Since I didn't hear from your I started with your PR (and it worked with Zooz Zsticks in Rpi3 and Rpi4- 40+ devices). However,...