anthonyevs

ok Stu, makes sense. Thing is, I have 2 good old type controllers with screens ready to go in new projects for my friends, so it`ll be a shame to...

Hi Stuart, sadly my inverter doesnt have the time slots in the menu. Your BMS does tho on my inverter accept the stop discharge command very well, it works great....

Hi Stuart, I was thinking, been as the shunt accurately counts in and out the AH into the battery, we could do this. 1. Drain the battery to your personalised...

Thank you for your guidance Dala, Im following your video for the 2 port can bridge flashing. Ive gone into the e-nv200 files and downloaded the ,srec file, downloaded the...

Ive done the battery swap today, its having a charge now to check it out, leafspy paired the battery but i do have 2 errors in leafspy, can errors.

Hello Dala, please may I ask a question. Its been since november the van has been running fine with a 40kwh battery swap. I did nit at the time do...

Thanks for the reply Dala. I have already tried using a different PC, with no success. On one attempt nothing happened, on other attemts the dll error shows up. I...

Issue now solved. What i found was that I had to download the software from the Green "code" box and then select download Zip. This download location has the 2...

Hi Stu, the current reading in history all thro the timeline was 0.122 amps every 1/2 hr interval as recorded. The bms gets its live and negative from the bms...

also. just checked my system as that has been shut down and isolated from the inverter for about a week and that also has a rogue current of 0.0126 amps...