antamy

Follow up to this. The problem is because the card displays the times in the timezone of the user, not the timezone of the home assistant installation. So in my...

Your logs are similar to what I am seeing (see issue #87). I also have RSSI around -100dbm, lots of single digit length ignored messages, then the occasional 4 digit...

I should play around with the frequency. I used RTL_433 with my SDR and pick up the two devices I am interested it at 915MHz. The sample rate is a...

> @antamy For testing of FSK Reception I used a Fineoffset WH51 @ 915 Mhz and had enabled FSK mode. When testing it was about 5 meters away. I'll double...

> When I was doing testing I used a rtl_sdr and rtl_433 to confirm the device signal etc Switching back to my issue to continue this

> Hi, > > I'm having the same issue. Is there already a fix for this? See my comment above. This is just how HA works. There was apparently no...

Thanks for the update! I've been working on another project and put this on the back burner, but will take a look at these updates later this week.

So I got this installed on the Pi and it finds the digi-stick. mrose17 had that working previously, so not sure if I'm supposed to see something different. Where is...

So are you going to be focusing on Zigbee HA devices? As far as I know, devices that use that standard are the ones where you can query their capabilities....