lidar_camera_calibration icon indicating copy to clipboard operation
lidar_camera_calibration copied to clipboard

Published 20 hours ago • verified publisher icon ankitdhall

projection from Lidar to camera

Open Git89 opened this issue 4 years ago • 1 comments

Hi! Thanks for the greatest work. I got a problem while using the calibration result to do projection from Lidar to camera.

Hardware: Logitech web camera (Mono), VLP-32C Velodyne Hardware setup: camera is placed on top of Lidar. Camera and Lidar both face front. No Gap between camera and Lidar. Parameters files: For aurco_mapping ccc For Lidar_camera_calibration config c dimen

Results: rrrr5

Question1 the ypr I got is (2.18,-1.42, -0.60) degree is (142,-81,-34). Is this result correct based on my hardware setup? If not, are there any suggestions you can give me? Anyway, I can not project any points from Lidar to camera frame now. Question2: why does final rotation not come with a final translation? which results should I use when I do projection? ypr or final rotation or average rotation and translation? Any additional information can be provided if needed. Many thanks in advance.

Git89 avatar May 07 '20 15:05 Git89

Hi Git89,

How are you projecting the lidar to camera?

AnthonyLadewig avatar Nov 02 '20 10:11 AnthonyLadewig