andypugh

Encoders have no velocity output

1

The LinuxCNC encoder drivers have a velocity output pin. (typically both rpm and rps for convenience) This is useful for velocity-feedback applications, for example with spindles. A reason to do...

Flow compensation / Flow (%) has no effect in 15.04.6 Mac Version.

1

I get identical G-code with flow compensation at 100% and 5%. I tried the same experiment on a Windows PC, also with 15.04.xx and saw the expected change in E-numbers.

Lock-up during load/unload stress-test

49

(Moving this out of the Graphics issue) I intend to try toggling some of the RTAI build options. I have tried a few, but nothing has helped yet. Turning of...

Kernel panic running testsuite

1

Jepler has been running tests not involving LinuxCNC, so I am suspecting this is a different issue: https://gist.github.com/jepler/212d2093f7feb22232f6d2a432e9cacd