andrum993
andrum993
It was working previously with the embedded Imager, so something's changed. Is there a way of getting to a shell within the Network Install environment to have a look? Also...
Thanks - the files in the zip file worked - drive shows up and I can successfully image the drive 👍
> @andrum993 Just confirming - did you later encounter the issues that @maxnet suggested may occur? No. This is a known working setup - the only part that wasn't working...
Just a heads up that Network Install is now enabled in the default bootloader EEPROM on Pi 5, but this bug prevents its use on any drive that Linux uses...
Hi @tdewey-rpi. Do you have an ETA for when this fix will find its way into Network Install - starting to get a bit annoying.
> ### Describe the bug > RPI website and RPI imager show the image for pi0 lite was update 3/12 along with all the others, and on the website the...
This is now working for me with the current Network Install image from `/net_install/boot.img` with file datetime `2024-06-20 16:39` on a Pi 4B 8GB Rev 1.4. Works both with target...
If my suggested IMPORTANT callout seems too strong, there's also an NOTE version - see https://docs.github.com/en/get-started/writing-on-github/getting-started-with-writing-and-formatting-on-github/basic-writing-and-formatting-syntax#alerts
Done 👍
> Important note: this issue is only reproducible with Raspberry Pi 4 boards without EEPROM for the VL805 firmware. The newer boards which have a EEPROM for the VL805 firmware...