Andrei Kavalenka

Update: I also deciced to try WiFi6 on this setup with this config file: [hostapd-WiFi6.conf](https://github.com/morrownr/USB-WiFi/blob/main/home/AP_Mode/hostapd-WiFi6.conf). Access point initialized secessfully, my Pixel 6 Pro shows that it's actually WiFi6 network with...

> Let me know what you think I'll install newer RasPiOS in that case. For some reaseon raspi imager offers only Debain 11 x32 for [Zero 2 W](https://www.raspberrypi.com/products/raspberry-pi-zero-2-w/), but it's...

I installed Raspy OS based on Debain 12, update hostapd to 2.11, repeat all steps from [AP Mode - How to build a bridged wireless access point](https://github.com/morrownr/USB-WiFi/blob/main/home/AP_Mode/Bridged_Wireless_Access_Point.md), but without bridge...

Unfortunately I don't see a log file in my home directory. Double checked all the steps but everything seems to be correct. Here is hostapd service file, maybe there something...

Update: I tried wifi5 config, but result is the same. I'm thinking that the reason could be in bridge settings (I don't configure bridge from Ethernet port, because I don't...

Any ideas why there isn't log file in the home directory?

Yes, in this message you could find my service file https://github.com/morrownr/USB-WiFi/issues/384#issuecomment-1966324318

After some research I found that problem could be in the absence of dhcp server, so now I'm trying to install and configure it.

Yes, but after disabling networkmanager and without Ethernet connection there is no IP address at my wlan0 interface (checked through if config). And I think that is the reason.

Yes, but it had no effect.