E-TKT
E-TKT copied to clipboard
andreisperid
open source embossed label maker
As in: https://hackaday.com/2022/06/15/diy-automated-printer-kerchunks-out-classic-embossed-labels/#comment-6484170
As in https://hackaday.com/2022/06/15/diy-automated-printer-kerchunks-out-classic-embossed-labels/#comment-6484189 Suggestions: https://www.youtube.com/watch?v=F0E5adLQ-AY&lc=UgwwJ4s63TFKkHuZJst4AaABAg
Frequently the font serving from the ESP32 takes more time than usual and the web app starts without the correct aspect, eventually getting stuck in that state.
The machine seldom mistakes the correct letter (rare), seems related to processing hiccups.
Restarts occur occasionally when loading the web app or sending commands, and it seems related to processing peaks that trigger the task watchdog.
Sometimes the status feedback (reel, cut, feed, print) does not update correctly and gets stuck.
Maybe add support for StallGuard4 and StealthChop2 via the TMC2209. It should be relatively easy since you already use the standard driver modules used in 3d printers. If you don’t...
I don’t have my pc with me right now so I can’t check what the screw hole diameter of the models is, but on my parts I had quite a...
Most M3 20mm could probably be replaced with at least 16mm screws. As I already mentioned in [issue 29](https://github.com/andreisperid/E-TKT/issues/29), 2,5*(outer thread diameter) screw-in depth is theoretically enough. 20mm are quite...