andrasj

I also tried some other commands with no luck. But I guess the firmware in the device does not support many other commands. Also the GoToPosition command implemented in csrmesh-cli,...

Tnx, could have thought about the webarchive (I only checked google cache). I've also sent an email twice with some questions/feedback, I didn't receive a reply. Currently even the 'SetPosition'...

currently there I am using 3 devices for testing all in a range of ca 6m (without walls). The transmitter is an intel edison board powered by the USB-port of...

opkg list-installed | grep bluez bluez5 - 5.37-r0 but I see gatttool comes from a bluez-5.24 folder I also did some quick tests on another miniPC (zotac nano running openSuSE),...

It turned out, the openSuSE with CSR-dongle wasn't reliable either. I cannot explain why, but it seems to work a little better when I open gatttool in interactive mode, and...

This weekend I spent some more time integrating the MOVE devices in my home automation. I made some code based on this python, which starts an interactive gatttool session to...

it seems everybody is experiencing these issues. Even the 'set position' command is implemented differently than the specs they released (which are offline in the meantime). My guess is the...

I also noticed that only the 'initial' packets got lost. If I remember correctly it was also device specific, it could happen that when sending packet to B,A,B,A,B all packets...

I asked teptron when we officially could expect all promised features in the android app. Here is their response: > For Android user we are going to publish an OTA...

A couple of days ago I updated the FW of 1 of my devices. But I didn't investigate further because the offical app behaves even worse than the old one....