Andriy Malyshenko
Andriy Malyshenko
ESP-32 target has `platformio.ini` file that is Platformio project file, i assuming it should be possible to build project using Platformio. Currently build if failing due to the way Platformio...
Key change is build automation using github actions. Upon every change pipeline is run to build custom docker container that provides build environment, then floppinux image is built using repo's...
Hey folks. I'm a developer of a few audio boards that work with snapclient, including [Louder-esp32](https://www.tindie.com/products/sonocotta/louder-esp32/) and [Esparagus](https://www.crowdsupply.com/sonocotta/esparagus-media-center) set of boards. I'm currently testing them together with the Home Assistant....
### Describe the bug Home Assistant / Music Assistant has a built-in LMS server that allows using slimproto clients to play the audio directly from HA. Seems that some communication...
Version 0.3.0 downloaded from release page. Flashed as binary. Whenever I try to change volume via web UI or Spotify controls, it doesn't change. Seens to stuck in maximum position....
Hey I decided to follow your steps and after spending some time and resolving small issues here and there decided to document my progress via code and build pipeline This...
Hey folks, I was curios to install the latest version of the project to try it out on the [Esparagus boards](https://www.crowdsupply.com/sonocotta/esparagus-media-center) that I've designed. I just noticed that latest release...
Hey folks, I'm building a Raspberry Pi Hat that uses two TAS5805M DACs connected in a 2.1 master/slave configuration. The schematics I'm using are very close to the setup of...
Fixes #136 **Issue description:** When DSP settings are enabled with high gain values together with a large volume level, audio starts to fill up with cracking sounds. This seems to...
Hey folks. I was working on the [web-installer](https://sonocotta.github.io/esparagus-snapclient-new/) for the snapclient, originally intending to pull the latest code from the master, but later decided to link the snapclient as a...