Amro Ibrahim

I might able to help if u tell me how to do it

did you find what is the issue? I have similar issue and I think that a new power supply with more amp could fix it. please share how u fixed...

I would recommend to run some other software to see if the cause of the problem is due to ambi-tv code or hardware related issue, there are some python scripts...

I was able to figure it out and fix my problem, in short the flickering I had was because I have to connect the 5V+ and the GRD that power...

@r3vO88 yes and that was the causing of the problem, I found out the hard way, you cant have 2 power supplies, the one that is powering the LEDs should...

@wisemonkey you cant put 2 power supplies! Just use the LED power supply to power pi and LEDs. Have a look at http://learn.adafruit.com/system/assets/assets/000/001/589/medium800/diagram.png?13448788 I had same issue ;)

I have a problem with the 52 version, and I hope some one could help me. I bought this one http://www.ebay.com/itm/52-LEDs-meter-1M-LPD8806-RGB-LED-strip-IP67-waterproof-USA-shipping-/160906910627?pt=LH_DefaultDomain_0&hash=item2576cc9ba3 and it keeps giving random color, I noticed that...

I was able to figure it out and fix my problem, in short the flickering I had was because I have to connect the 5V+ and the GRD that power...

@jonnieboyrevel what LEDs do u have? 52 per meter version?

What does the error say? I do remember compiling the given code before with no issues.