amisix

You're welcome. You've put lots of effort into this site. Thank you for your [write-up here](https://github.com/morrownr/7612u) regarding USB scatter-gather with additional [details here](https://github.com/morrownr/7612u/blob/main/mt76_usb.conf).

I thought so too, but for reference: https://github.com/openwrt/mt76/issues/405#issuecomment-1030740067 There is no sudo/no need for sudo in OpenWrt (depending if config is different than default I guess?) There is no /etc/modprobe.d...

Thanks for contacting ANDDEAR. Be wary - they are in my opinion currently selling non-functional mt7612u adapters. My hope would be they don't repeat the same mistake(s) with their mt7621au...

It doesn't initialize/work in certain USB3 ports, issue was originally identified on a Raspberry Pi 4B then replicated on several other x86 platforms. USB3 Port 1 "Top" USB port fails,...

Oh.. that would be quite nice, hardware flow offloading in a USB adapter with AX capabilities.

>I see you are using ifconfig and iwconfig. Those are old and have been depreciated. Use iw and ip Will do, thanks. Easier to remember anyway. I was eventually able...

Hi @morrownr - I apologize for the delayed response. >I decided to make a repo for the script today as that will allow folks to work on it and submit...

Cool, got it, thank you. Doing that and just having one script for each adapter works great - as suggested, looks like I should learn about BASH scripting so I...

@morrownr does a really good [comparison here](https://github.com/morrownr/USB-WiFi). My opinion, go with the Alfa AWUS036ACM (mt7612u) adapter as it meets your requirements for speed and distance. It's also low power consumption...

>...long range and a speed of up to 55MB/s 55MB/s is a requirement that I don't think you'll be able to meet without using Wifi 6 (AX). Using speedtest.net I'm...