Antoniu Miclăuş
Antoniu Miclăuş
Add trace averaging feature in the oscilloscope, being able to manually configure the number of sweeps to average. This feature is available in the ALICE app for M2K: https://wiki.analog.com/university/tools/m2k/scopy/oscilloscope#using_built-in_signal_measurement_features This...
Connect M2K. Start Scopy and connect to the detected device. Open the Oscilloscope and enable the Measure feature. Apply a ramp/triangle signal with any frequency 1Hz-200kHz (5Vpp). Observe the measurement...
Based on reviews, some people might prefer using the Smith Chart for data visualization. Is this a reasonable feature that can be implemented? Reference: https://youtu.be/pNHWq4Owsb4
Would it be an idea to use trace averaging for the XY plots? Maybe we can obtain nicer plots than, for example, this one:  (photo took from ADALM2000 Lab...
Connect M2K. Start Scopy, select the detected device. Press "Connect" button. After the connection is made, select Oscilloscope feature. A "Track Waveform" feature should be added, that manages the horizontal...
This topic is opened based on the discussion regarding the maximum supported input voltage. (See #83 )
Scopy version: e9a6c85 For Uniform Noise Type, currently the amplitude is implemented as peak value.  Shouldn't it represent the peak-peak value?
I think that is more intuitive to have the selected marker yellow filled. See pic (M2 is selected, M1 is yellow filled). 
## Pull Request Description Similar to ad74416h the driver is not yet public. The documentation will be added when the part will become available. This PR adds driver support and...
## Pull Request Description The LTC4296-1 is an IEEE 802.3cg-compliant, five port, single-pair power over Ethernet (SPoE), power sourcing equipment (PSE) controller. SPoE simplifies system design and installation with standardized...