alexmaron81

GPIO 0 doesn't work.

4

I would like to control the ssd1351 via SPI. What would the main.c look like for this?

do not "Taking down network..." after Unable to connect to server?

11

Hi Rob,  and here the code [getNTP.txt](https://github.com/u-blox/ubxlib/files/9288999/getNTP.txt)

Unable to bring up the network!

6

Hi, sometimes the connection is not successfully established, so that the module no longer works. Unfortunately I don't use the following options: U_CFG_APP_PIN_CELL_ENABLE_POWER U_CFG_APP_PIN_CELL_RESET U_CFG_APP_PIN_CELL_VINT What other option is there...

multiple transmission of a mqtt message with only one sent

9

I have the problem that when I publish a message, four always arrive? the next time i send, there are already 8 in the queue Rabbitmq broker (MQTT)

Cell Locate response with zero

4

Hi, I have the following output when using the example? 

Error when establishing the mqtt connection

16

Hello @RobMeades . I use an ESP32 with the ESP-IDF library and try again to establish a connection to the mqtt service. And I get the following error message as...

***ERROR*** A stack overflow in task eventTask has been detected.

10

Hi Rob, I get a stack overflow but not always. What is the best way to proceed? As a reminder, I use ESP32

Cannot establish an MQTT connection from Thailand

20

Hi Rob, the connection to the APN is established in Thailand, but not to the MQTT. Other devices in Germany work well. Mobile provider 1nce (VPN) [ConnectionLogThai.txt](https://github.com/u-blox/ubxlib/files/15129267/ConnectionLogThai.txt)