alessio31183
alessio31183
I've tried your library and the examples with the internal 8MHz oscillator. There is some problem running at that speed. Any suggestion?
Hi Thomas, I was wondering if there was an Arduino library for some Atmel uC with the CANBUS controller integrated and I found your code. The question is how to...
Hi, are you including these can driver for the atmegaXXM1 cpus family? https://github.com/thomasonw/avr_can
any chance to get a multilayer coil? I'm using this tool https://github.com/in3otd/spiki but yours seems to be more powerful. In that case I can design a 2 layer coil as...
Hi, I'm comparing your tool with this: https://github.com/ignamv/kicad_scripts I'm getting the same values for L and Q but the most important thing is that the resonant capacitance value is missing...
First of all thanks for the effort to make this possible :) Second: I'm not able to open objdictgen.py. After the command: alessio@alessio-VGN-NS21M-W:~/Documents/Lavoro/UNIBS/CANBUS/CANOPEN/Firmware/CANFestivino/objdictgen$ python objdictgen.py Node.od Node.c Traceback (most recent...
Dear all, I'm struggling a bit because I'm not able to make running the CanFestival from the original project (https://bitbucket.org/Mongo/canfestival-3-asc/src). Actually the only example that works on the ATmega64M1 is...
Hi guys, I've implemented the CANFestivino on the ATmega64M1 successfully. Actually I'm just sending a PDO with the information cyclically at 100ms through the bus. The next step to cover...
I've made the code porting for your CANFestivino project on an ATtiny1634. The main modifications were on the library digitalWriteFast. Currently the code is very near to the entire flash...
Instead of having the external can controller MCP2515, it seems to be more convenient using the AtmegaxxM1 uC that has the internal can controller. [https://github.com/thomasonw/ATmegaxxM1-C1](url) I've attached the link to...