akurekin
akurekin
There is not problem with climbing up or descending down. It is controlled very well and I can fly confidently in acro mode. But it make a very aggressive manoeuvre...
The drone was above the RTH hight and was not climbing up. It would be great if I could control the angular acceleration, not vertical.
How about AXIS_ACCEL_MIN_LIMIT parameter? Can I reduce it? I don't need my drone be sharp in flight, it's a long range drone.
PID parameters are currently tuned as follows: P=40; I=25; D=20. These are set to minimum values that will provide reasonably good performance. I tried different PID settings and they did...
What parameters then control the flight aggressiveness in RTH mode ?
It looks like the discussion has diverged from the original topic and I'll try to bring it back on it's rails. I have to admit, I did not pay enough...
I would like to clarify that only the camera video image is split into two parts but OSD is fine. So, it is not an issue with HDMI, it's an...
Hi, here is what I did. Firstly I tried the default settings and the camera image was split in two parts. By default I have WIDTH=1280 HEIGHT=720 in openhd-settings-1.txt. Then...
I made some progress with my question. It looks like Pi Zero Air is not capable of running at 1920x1080 resolution, the one that OpenHD 2.0.12 + Veye are running...