akirjavainen
akirjavainen
There seems to be a lot of variation with this protocol between different brands. Some care about the checksum, some not. Timings vary quite a bit, too. As for cracking...
Hi! I am not familiar with the Broadlink RM Pro or RAEX motors and without hardware it would be difficult to test. My suggestion would be to look for other...
Apologies for the (very) delayed answer. There is some variation with timings on different remotes and receivers. I'd try modifying AGC timings from RemoteCapture.ino wider from the `while` loops. For...
If it's a wireless motor controlled by an RF remote then chances are the protocol is exactly the same. Unfortunately it's pretty much impossible to verify without such a motor....
Thank you and awesome to hear this project has helped you! I'll take a look at that pull request. :)
Hi brancooo1! The example codes are copied from an actual physical remote so yes, they are perfectly usable!
Thank you for your comments! My best guess is that the transmitter is falling behind and cannot maintain steady timing with so many commands being sent. You could try reducing...
Ironically, that may in fact happen for the very same reason: some commands fail (inaccurate timing at the transmitter, for whatever reason), so more repetitions "fixes" it because some of...