akgnah
akgnah
> If I unplug the NVMe drive, so that socket is empty on the top, the 2nd 2.5G Ethernet port isn't working. I see the 1st port, but port 2...
> I also tested a Pineboards HatDrive! M.2 HAT plugged into the FFC on the board, and it didn't light up the PWR LED at all, nor did the drive...
> I've also tried using PCIe Gen 2, and the NVMe attached to the board, and it still shows up with `lspci`, but doesn't list under `lsblk`. The NVMe device...
> To be clear, if I remove it from the board, rotate the entire connector 180°, and re-solder it there, it should be wired up correctly? Yes, if it's rotated...