Serhii Frolov

I'm using modesetting driver on Intel HD 630 (Kaby Lake) and haven't found a proper solution to tearing either. I have no trouble with performance, but no available vsync method...

In my case I've waited for 20 minutes without any progress. Workaround is to unsubscribe from all the channels you don't actively participate in, then kill and start the app...

I've tried this on Bloomz mt0-xl: ``` (v:llama.cpp) aidaho@lin:~/bin/llama.cpp$ python3 tokenconvert.py BPE /media/aidaho/blue/llm-files/mt0-xl/ Traceback (most recent call last): File "/home/aidaho/bin/llama.cpp/tokenconvert.py", line 87, in tokenizer = load_tokenizer_from_json(input_json_path, special_tokens_map_path, tokenizer_config_path, tokenizer_type) File...

 FC pad layout for your convenience

Another datapoint: `gpspassthrough` shows data streaming in. 

So I need to set up GPS unit for lower baud and refresh rate first. I've ordered USB-UART converter and will update the ticket once I have a chance to...

I've received USB-UART converter, soldered it's rx-tx on top of FC connections, and successfully changed GPS settings to 9600, 2Hz, UBX NAV-PVT only. I've verified softserial is at fixed 9600...

I've also updated FC to Betaflight 4.4.3, this however did not influence the outcome.

Additional things I've tried: • Do a 2hz 19200 setup. • Desolder USB-UART in case it causes any interference. • Do an RX only setup on LED pad, insead of...

The issue is still there. While the GPS unit is no longer a part of the build, I've left a bunch of wires attached to the FC in order to...