Ahmed BENLAKHEL

icon company Telnet Holding icon location Rue Du Lac Léman, Les berges du Lac, Tunis 1053 icon location I'm an embedded software engineer at Telnet Holding. I have a big knowledge of IA, IoT, Linux, and electronics. I love learning, developing, and creating.

Results 5 comments of Ahmed BENLAKHEL

Failed to set SX1250_0 in STANDBY_RC mode

I had the same problem and I have tested the reset_lgw.sh and it works and i have changed the sx_1302_reset

Failed to set SX1250_0 in STANDBY_RC mode

but the problem isn't resolved

Failed to set SX1250_0 in STANDBY_RC mode

this library is configured for raspberry pi os 32 bits. it's not compatible with 64 bits architecture

Failed to set SX1250_0 in STANDBY_RC mode

So, I did a cross-compilation with aarch64-linux-gnu toolchain for this project and i copied libraries and binary files in raspberry card the is worked but the RX test show this...

Failed to set SX1250_0 in STANDBY_RC mode

Ok, I will check. thank you for your interraction Le mar. 7 juin 2022 à 10:28, Guinnes Singh ***@***.***> a écrit : > @ahmed560 If you see the error Failed...