aguti2

Hi, @pagaille, hi @Strobistar I have an ebus adapter reading from my Ecotec Plus, throug the fantastic ebusd daemon, working since last year and getting comsuptions to fine tunning hours...

Hello @Strobistar and @pagaille Thanks for your super fast answer. That´s what I suspected, the bus concept is clear, but sometimes is necesary some kind of buffer, voltage adapter or...

Hi @pagaille, I have seen that you have made your own power supply for the aurostep. Would you share any thing more to guide me. For example the power source...

Hello @pagaille, Thank you for your fast answer as usual, very kind. This is a very simple design, but if you have it in a breadboard, i think would be...

Hello @Strobistar and @pagaille, Last night I made conection between the ecotec and the aurostep. No smoke at all so there was good news. It took several restarts of the...

Thank you @Strobistar, I´ve copied from the url, not tried with git clone. I´ll try this afternoon. Thank you so much. I´ll tell you about it.

Hi guys, @Strobistar and @pagaille, That worked fine!!!!! Thanks for your support.  I did the git clone and worked fine, but as you can see the ebusctl goes on...