Stefan Agner

@rolf-tx transfering the Thread credentials into iOS is not yet supported, but should soon follow. Currently you can only join an existing Thread network, e.g. when you have an Apple...

> When using Home Assistant hardware, either Yellow or SkyConnect, then these devices will show up on the hardware page. From what I understand this is the only place when...

We'll add a Thread channel change feature in the Thread panel at one point. That will allow manually change the channels on Zigbee and Thread side. Meanwhile, the API can...

> How do you manually change Zigbee channel though? ZHA no longer allows this when using multiprotocol, and instead refers you to the non-existent hardware integration. Good point, that use...

In pure Thread mode you get this option:  @francisp2 is this missing/not working in your case? Typically, with Multiprotocol we coordinate the channel change, in that...

Changing channel on the Zigbee side is only possible through the EmberZNet serial protocol (EZSP). From what I understand you are using Zigbee2MQTT? So this needs to be initiated from...

Ok wait, so I better understand: Your goal is to use Thread and ZHA, and change the channel of both? But there is no way as the hardware config is...

@meiser79 this is the default behavior we inherit from the OpenThread border router we deploy in the Silicon Labs Multiprotocol add-on. I do have a GUA available in my network...

@spartandrew18 it seems that the otbr-agent is continuing to restart in a loop? Do you maybe have the logs from when things first failed? You can get more logs through...

Thanks for the logs. Some interesting snippets: ``` Aug 30 04:22:33 homeassistant addon_core_silabs_multiprotocol[474]: otbr-agent[306]: 06:19:39.085 [W] Platform------: radio tx timeout Aug 30 04:22:33 homeassistant addon_core_silabs_multiprotocol[474]: otbr-agent[306]: 06:19:39.085 [W] Platform------: RCP...