Andrei Gherzan

Fork-based setup seems to cancel itself and not the target workflows

6

I have a setup based on `workflow_run`. You can see it [here](https://github.com/agherzan/meta-raspberrypi/actions/runs/1868857692/workflow). For whatever reason, when running, the job seems to cancel itself as opposed to the workflow that triggered...

We want to expose a way for users to define and take advantage of extra partitions. We are currently working on a spec for this: https://github.com/balena-io/balena/pull/1360. We will update this...

_From @lifeeth on July 6, 2016 8:38_ Using the image this way actually modifies the contents of the file, which is new for us, other image files don't do that,...

Exit tests on first failure

1

_From @lifeeth on October 3, 2016 21:12_ This would allow us to clearly figure out which of the tests failed. _Copied from original issue: resin-os/resin-qemu#21_

Pi Zero OTG support

7

_From @konradko on September 2, 2016 16:32_ Pi Zero can be powered and accessed from single USB port (it appears as Ethernet device). That functionality is currently missing in ResinOS,...

# Steps to reproduce issue Connect to the HDMI connected to a monitor Boot the device # Expected result The tux (linux) logos should not be visible on the screen...

# Steps to reproduce issue Connect to the HDMI connected to a monitor Boot the device # Expected result The tux (linux) logos should not be visible on the screen...

# Steps to reproduce issue Connect to the HDMI connected to a monitor 1. Boot the device. 2. Reboot the device from the dashboard. 3. Shutdown the device from the...

# Description Test that the identification LED is working # Steps to reproduce issue Go to the device's web page Click on IDENTIFY DEVICE (BLINK LED) # Expected result Device...

# Description This tests updating the host OS using hostapps-update within the current resinOS release. # Steps to reproduce issue For this test, you will provision the device with the...