James Adair

i have been playing with the code and have been able to get 4 extra output pins to somewhat work. they will toggle individually and all off through 'M' codes...

correction, it now works with 4 additional output pins tested with bCNC and snapcnc outputs have individual toggle as well as an all off [MEGA2560 grbl1.1e MOD.zip](https://github.com/dguerizec/grbl-Mega-4axis/files/2725925/MEGA2560.grbl1.1e.MOD.zip)

I made my own pcb based on a grbl shield. I had a few professionally made. I supports 6 axis and total of 6 output relay controls Cool & mist...

Another note... I use all external motor drivers, not the DRV modules. Will that be an issue? If not, give me a few days to get put together and copy...

Correct. On Fri, Dec 30, 2022, 10:09 michalelektryk ***@***.***> wrote: > Can you elaborate a bit on external motor drivers? Does it mean your board > has just step/dir outputs...

I did start with the small DRV modules but kept burning up. I am using NEMA23 motors for all 5 axis I believe I may have an add-on board for...

No, relays are on/off only The dual motors can be parallel from wiring off mega also. Each on its own DRV and same signal from mega. If i have 2...

Yes, I actually made you 2 adaptor boards I'm am in process of soldering the mega shield. On Mon, Jan 2, 2023, 10:00 michalelektryk ***@***.***> wrote: > Were you able...

I will send you papers with wiring diagrams also On Mon, Jan 2, 2023, 10:08 James 360 ***@***.***> wrote: > Yes, I actually made you 2 adaptor boards > I'm...

I have all the boards ready to ship. It will take me a few days to get mailed because of my work schedule. I will let you know when the...