Adrien Guironnet

BusFault model

3

@AndreaBartolini @casella I planned to add a new test case with a bus fault for IEEE14 system as well as potentially developing a line fault model (ie having a fault...

Add Grid Forming models

1

This issue aims at implementing generic Grid Forming models based on a modular structure for inner and outer loops that would be usable in generic stability studies. The different final...

Failure with the WECC models due to deadband handling in the Plant Controller

1

Using the WECC WTG4B model with IDA, I get a non convergent situation due to unstable roots on the following equation: Zero crossing for condition change in relation 30: tmp80...

The official report for the Nordic Test System mentions two operating points: the operating point A which is unstable and the operating point B which is stable. Currently only the...

Create a constant to define the default ratio between QMax and PMax

1

In classes inherited from InjectorInterfaceIIDM (BatteryInterfaceIIDM, GeneratorInterfaceIIDM), the default ratio between QMax and PMax is hardcoded several times (and the same applies for QMin and PMin). Using a constant would...

Error during model compilation - Use of undeclared identifier "X"

11

### Description During the model compilation, the process stops with an error due to the use of undeclared identifier "X" in the compilation of the _12jac.c file compilation. This is...

Simplify/rationalize Modelica models initial values requirements

1

In a large number of Modelica models available in the library, the initial information that the user should provide is too important and redundant. In particular, in many models, i...

**Checklist before requesting a review** *use `'[x]'` to check the checkboxes, or submit the PR and then click the checkboxes* - [ ] unit tests and non-regression tests were added...