adrianVmariano

Spec on torx, but only on assessing if the recess is correct, not on how to fabricate. https://cdn.standards.iteh.ai/samples/63207/f79670cf0a214881aa40b4822580cce3/ISO-10664-2014.pdf Recess depth in the code appears to be the length of the...

Hex (allen wrench) depth on set screws is half of the flat-to-flat width of the hex. You still have torx depth bigger than torx diameter. This causes the torx recess...

 Example CAD from McMaster for a T45 recess in an M10 button head screw. It's about 2.5 mm deep as shown by ruler. The diameter is 8mm. I think...

I found that torx socket head screws are defined by ISO 14579. We could use this data for that table, but it doesn't necessarily apply to any other torx equipped...

It's not clear that textures available only as a vnf should have "vnf" in their name. So having "bricks" and "vnf_bricks" makes sense, but "dots" instead of "vnf_dots" seems better....

A clarification on the second idea for the table: have a column for height field textures and a column for vnf textures, and then a column for description. When a...

What do you think of the idea of a single table with a column for VNF or heightfield? (Or both?) And what about only using the "vnf_" prefix on texture...

My initial reaction to this request is that it's not really very useful and PT is a generic variable standing for "point" that also has a geometric interpretation. Why do...

I was surprised by the behavior of cuboid(100){ attach(CENTER,CENTER) cyl(r1=40,r2=0, h=175); } though it does make sense once you think that the CENTER anchors point up. I suggest a specific...

After further experimentation I found that `attach(TOP,BACK) thing()` and `attach(TOP) thing(anchor=BACK)` are not at all the same. I think you should consider reorganizing the attaching things section of the tutorial...