HT1632
HT1632 copied to clipboard
adafruit
Arduino library code for HT1632(C) matrix panel driver chips, and the panels we have in the Adafruit shop
Hello, I have 4* 8x8LED with 1 HT1632C. Your library works with 3* 8x8 LED. The fourth doesn't work. How to repair it ? Thanks
This is a suggestion to add pinMode(.., OUTPUT) to all of the pins in the example code. I do see pinMode(..., OUTPUT) in the library but I think I had...
There is no specified license file in this repo and none of the sources specify any copyright or licensing information. Technically nobody can use these files since they are by...
This pull request contains two modifications: 1) Add a getPixel method to both HT1632 and HT1632LEDMatrix to enable reading back the currently set pixel values. The pixel index calculation logic...
Fixes #7. This is because of changes to the lateset avr-gcc compiler embedded in Arduino 1.6+. [Read more here](https://github.com/arduino/Arduino/wiki/1.6-Frequently-Asked-Questions#q-i-get-an-error-message-that-says-variable-message-must-be-const-in-order-to-be-put-into-read-only-section-by-means-of-__attribute__progmem-char-message-progmem--hello-what-can-i-do).
Error when compiling: ``` /Users/tguidon/Documents/Arduino/libraries/HT1632/glcdfont.c:15:23: error: variable 'font' must be const in order to be put into read-only section by means of '__attribute__((progmem))' static unsigned char font[] PROGMEM = {...
Hi, the following Issue was fixed by @PaintYourDragon in the 'master' Adafruit-GFX-Library ~ https://github.com/adafruit/Adafruit-GFX-Library/issues/22 The Issue is a historically missing character for Code Page 432. See commit: https://github.com/adafruit/Adafruit-GFX-Library/commit/ea4c4c5596aaa91e1e10c89c7817df4e12e312c5 I believe...
I have added improved support for the 32*8 configuration. My module is [JY-MCU 3208 Lattice Clock HT1632C Driver](http://dx.com/jy-mcu-3208-lattice-clock-ht1632c-driver-with-mcu-support-secondary-development-104306?item=3). I have also added support for vertical multi-panel configuration as well as...
I'm using 4 16x24 Led Matrices from Adafruit and wondering if it's possible to change the library to recognize 2+2 matrices instead of a chain of 4 matrices? For example:...
