acca84
acca84
[CFFFP_cube 4x4x1 One hot end.txt](https://github.com/makerbase-mks/SGEN_L/files/5535216/CFFFP_cube.4x4x1.One.hot.end.txt) [CFFFP_cube 4x4x1 Two hotends.txt](https://github.com/makerbase-mks/SGEN_L/files/5535217/CFFFP_cube.4x4x1.Two.hotends.txt) Edit : maybe you wanted a video : As you can see, the print starts normaly, the printer prints the first...
Today, i tried to print the same Gcode with pronterface over USB, it did print the whole code I think the problem comes from the screen
I tried with the TFT with SD and usb
Hello, i found the origin of the problem I plugged a LCD 12864 screen to the mks sgen l board and found that the print stopped due to a thermal...
Ok, thanks my motors have 1,68A rated current, the default voltage on TMC2208 is 1,1v it seams ok if i apply 1,68/1,41 Am i right ? Is that supposed to...
Hello I have the same problem with Robin nano v1.2 and Mks-Robin-Nano-Marlin2.0-Firmware Did you solve it ? Thanks
I've just bought an um2 with ulticontroller dead, I'm thinking about solutions to save it
The motherboard works with cura connected to USB The 12864 is a module including screen, sdcard reader and knob It is supported in Marlin 2.0 : ``` // MKS MINI12864...
Hello, is that possible to connect DS4 on Webos5 ? I don't find where
Thanks, but i dont have this item in "connexion"