Andrew Katz

[feature] CSV BOM output

1

While the TSV type output is fine, if one is directly ordering from the BOM, such as through Digikey, CSV format is preferred. A simple way to do this is...

[feature] Netlist input/output

4

It would be nice to have an output and/or input for some form of EDA type netlist, whether in SPICE type format, Protel/Altium format, Kicad format, eagle format, etc. If...

[feature] Support linked part-numbers (Mating connectors, contacts)

2

It would be nice to add fields within the connectors for mating connectors, and for the crimp contacts for the connectors. While this is not strictly necessary, it would make...

Harbor 1.6.3 does not seem to be in GitHub Packages; there does not seem to be any CI related to pushing harbor to GH packages or any other maven repo....

For use by developers, I have added the creation of Javadoc and Sources jars as outputs to the mavem POM. See #90

Lombok

1

For code cleanup and optimization purposes related to #88, I'd like to add a dependancy/annotation processor, specifically [Project Lombok](https://projectlombok.org/) If accepted, I will make a separate PR. It's useful to...

I propose that bytes 3 and 4 of the data section be used to signal the direction of the GPIO expander pins, so that badges with LED flashing code will...

[Request] Scans of PCBs

1

Would it be possible for you to scan the front and back of each of the samples, and include them in the repo? It would be very helpful especially for...