aQuaplug

4.3.0 is much better than 4.3.1 to me. I tested multiple times with 4.3.0 and 4.3.1 with CrazybeeF4FR (1S Whoop), and Crazyf4 pro 12A with diversity SPI receiver (MATEKF411RX target)...

I think it's very harmful to FPV equipments. Many parts of miniquads needs cooling by airflow while flying, especially VTX.

@anzejarni Yes, adding hardware switch, or some FC has bulit in power switch for VTX. But it's still dangerous feature for novices who don't know that. Sure I think it...

TinyHawk II (MATEK F411RX) BF4.3.0(Frsky_X) also lost signal within 10meters. So sad... not just 4.3.1 but also 4.3.0

I test other BLHeli32 ESCs. Not beeps OK sign same. I think problem could be initial throttle recognize. Cause some testing I heard ESC calibration beeps without RX and without...

> Hi, I'm new here so forgive me if this has already been stated and this is the wrong thread. > > I just flashed my SP Racing Pro F3...

@LeKestral https://github.com/betaflight/betaflight/wiki/Building-Betaflight-on-Windows,-the-Linux-subsystem-way add/ remove features "src/main/target/SPRACINGF3/target.h" references "src/main/target/common_pre.h" FC CPU usage will highly increase when powering ESCs with RPM filtering. In my case 4k/2k(minimum looptime for dynamic filter) + RPM...

@LeKestral Oh is it? I have wrong memory cause I did it long time ago :) And if you have problem with build firmware, I'll send you my firmware. It...

@LeKestral Ah I found way to attach file on here. I was blind ;) [betaflight_SPRACINGF3_4.1.1_WT.zip](https://github.com/joelucid/betaflight/files/9793976/betaflight_SPRACINGF3_4.1.1_WT.zip) Sorry I don't have F3 source files anymore, but just firmware file. I think I...

I do need option 'Install all'. I have several radios and plenty of receivers. I like play and test with them. That's my hobby. I don't want flash everytime when...