Yoda-x

can you enable debugging for bellows and zigpy and send me the logs for the time when you shake the sensor thanks

Hi Eric, 1. you use the mainstream zigpy and not my version, this break some things 2. I see in your log the commands when an alarm is generated. That's...

if you start hass, it installs the default bellows/zigpy. Threre is a command line option to disable this feature. I added a patch yesterday, that zha_new pulls now my version....

Hi i added support for this type of sensors. Please update to my preview branch for zha_new bellows and zigpy ( 1. install the zha_new files, 2. install bellows `pip3...

can you please verify the versions for zigpy = 0.1.3-Y-pre bellow = 0.7.2-Y-pre in your container? There is one error in the log, that is fixed in the preview code....

I modified the zha_new code. It should now load the required bellows/zigpy it self. no need for manual installation with pip. Please refresh the preview zha-code and give it another...

I found a bug in the zigpy code and it should be fixed now. You are right I not updated the preview branch, sorry for the confusion. please refresh zigpy...

right, I don't see anything coming in from your log. Can you repair the sensor. I assume the sensor is not correctly paired. The init routine runs only when a...

From what I see in the logs it generated a plenty of alarms. please create an automation script and then check your logbook. ``` - alias: click_log id: click_log initial_state:...

If nothing comes in from the sensor if you shake, it gets difficult. Btw, what sensor you have ? https://support.smartthings.com/hc/en-us/articles/213496343 or https://support.smartthings.com/hc/en-gb/articles/205382174-SmartThings-Multi-Sensor