T-PicoC3
T-PicoC3 copied to clipboard
Xinyuan-LilyGO
A simple example to write to 4 MB.
I have errors like this: Arduino:1.8.19 (Linux), Płytka:"ESP32C3 Dev Module, Disabled, Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS), 160MHz (WiFi), QIO, 80MHz, 4MB (32Mb), 921600, None, Enabled" Traceback (most recent...
This is how to get the T-PicoC3 (or any other Raspberry Pico board) working on PIO. This makes use of the same 'earlephilhower arduino-pico core' that is available in Arduino...
Can you provide some examples in Micropython that show using the wifi, and the LCD display?
I can only find 3.7v batteries, what are the specifications of the battery I need in order to use with the board?
Hi there, I tried to flash the latest AT firmware and the ESP doesn't work on AT Commands. Can you please explain step by step what to do after the...
Hi I need some help: the ESP32 of my T-Pico C3 is stuck in deep sleep. I was testing the deep sleep feature of the ESP32. I planned to wake...
Hi the schematic says battery detection capacity is GPIO pin 26 but esphome says its not a valid pin is a mistake on the schematic?
I have this device working well with Micropython on the RP2040. It sends and receives to the internet via WiFi from the ESP chip on Serial/UART using AT commands. Also...
Every time I try to use WiFi capabilities using MicroPython with this device, I get this error: `[Errno 1] EPERM` Online, that seems to point to either a faulty WiFi...
