T-Display-S3-Long
T-Display-S3-Long copied to clipboard
Xinyuan-LilyGO
Hi, It was not so easy to install, but after a struggle, I made it to compile and upload the factory example (I had to change the factory. ino to...
Would it be possible to get a full pin out on this device? Something similar to what the T-Display-S3 is provided (https://cdn.shopify.com/s/files/1/0617/7190/7253/files/T-DISPLAY-S3-Touch_1024x1024.jpg?v=1706754399)?
Hi, I'm experiencing some issue with the charging speed rate on the SY6970. I included the library from lilygo's repository. Even after setting up _PMU.setChargerConstantCurr();_ to _PMU.setChargerConstantCurr(3200);_ The tested charging...
Hi, just got my S3-Long. I followed all the instructions for the Arduino IDE Quick Start. As the instructions are not that clear, (step 2) after installing the Arduino ESP32...
I have a simple application (weather / clock) that just connects to WiFi, periodically updates weather information, and displays it. Everything works fine and it runs for hours (stable, low...
lib was added from this github, board was setup like in jpg but in all examples I have this error. 'lv_msg_t' has not been declared how I can to solve...
What should i do if when I connect the display to USB, the screen is all black, green light is actively blinking, and PC says USB device not recognized ?
I'd like to use the USB-C port for USB host services (keyboard, MIDI, etc). It doesn't seem to be providing any voltage across VBUS and GND when a USB-C cable...
c est dommage que vous n avez pas encore corriger cela pour que ca fonctionne avec tft espi ou une autre librairies je voulais utilisez votre ecran pour un projet...
