X3msnake
X3msnake
https://toshiba.semicon-storage.com/ap-en/semiconductor/product/interface-bridge-ics-for-mobile-peripheral-devices/display-interface-bridge-ics/detail.TC358778XBG.html eljuligallego escreveu no dia quinta, 7/05/2020 à(s) 16:38: > what do you mean for "toshiba rgb2mipi"? > > — > You are receiving this because you authored the thread....
https://toshiba.semicon-storage.com/ap-en/semiconductor/product/interface-bridge-ics-for-mobile-peripheral-devices.html Vinicius Silva escreveu no dia quinta, 7/05/2020 à(s) 19:00: > > https://toshiba.semicon-storage.com/ap-en/semiconductor/product/interface-bridge-ics-for-mobile-peripheral-devices/display-interface-bridge-ics/detail.TC358778XBG.html > > > eljuligallego escreveu no dia quinta, > 7/05/2020 à(s) 16:38: > >> what do you...
Xilinx has integrated mipi decoding https://www.xilinx.com/support/documentation/ip_documentation/mipi_dphy/v4_2/pg202-mipi-dphy.pdf Vinicius Silva escreveu no dia quinta, 7/05/2020 à(s) 19:01: > > https://toshiba.semicon-storage.com/ap-en/semiconductor/product/interface-bridge-ics-for-mobile-peripheral-devices.html > > > Vinicius Silva escreveu no dia quinta, 7/05/2020 > à(s)...
ok if you say so i have no reason not to believe you. just sharing what i know about old models like cyclone2 No dia quinta-feira, 7 de maio de...
Looks like you have to tune up the retraction params
What PLA Brand did u use?
Not on the ultimaker, but in Cura. I would do a run with the Tower temperature test first to see if it is not a nozzle temperature thing first https://github.com/kickstarter/kickstarter-autodesk-3d/wiki/Further-Testing
I have to disagree here. White on White and black on black are good options because white on black is too hard to photograph A alternative is White or Black...
Apparently it has it's own version of exposure test, similar to what is seen on Photon S REFS Since the SL1 still does not support gcode there is not much...
actually it takes around 5 to 8 minutes maximum to have a good ballpark on the starting values Khalil N. escreveu no dia terça, 14/04/2020 à(s) 19:24: > I've done...