Wojciech Bednarski

Yeah, I opened an issue on the repetier firmware https://github.com/repetier/Repetier-Firmware/issues/640 , it would be great if you can give a little bit of contribution there about the memory usage and...

Well, the best I achieved in the HW SPI was a black screen (all pixels ON), but I will try to play with it this week, hopefully with some success....

Actually I was mistaken - RS pin is not connected to the display, so low or high doesn't matter, unless you mean trying to find a place on the display...

@Kulitorum - yes, it's that display @repetier - Thank you very much, you're the best!:) I'll try to find time next weekend to test it out. On Marlin I managed...

In the evening I'll send you guys how I did it. It required a little bit of soldering as I gave up with fiddling in the software. I discovered that...

Below what I promised. The schematic is a little bit vague and not contain the power supply traces, but you should get the idea. On the red I marked the...

We all have limitations:) LCD works great with u8glib2 and HWSPI, but it was beyond my capabilities to modify either repetier or marlin to use that library. I tried, but...

#define MINIPANEL But you must go through the firmware I posted, in file ultralcd_impl_DOGM.h I modified line 176: ``` #elif ENABLED(MINIPANEL) // The MINIPanel display //U8GLIB_MINI12864 u8g(DOGLCD_CS, DOGLCD_A0); // 8...

It seems to me that the one that is mentioned may be incorrect for the model I have. I tried the oldest firmware I found on the internet. It seems...