WEIS

WEIS copied to clipboard

## Purpose New libraries for the visualization tool being developed. ## Type of change What types of change is it? - [ ] Bugfix (non-breaking change which fixes an issue)...

mayankchetan

Installation instructions on 'main' points to environment.yaml in the 'develop' branch.

3

## Description Installation instructions on `main` points to environment.yaml in the `develop` branch. ### Steps to reproduce issue I have not come across an issue, but could lead to potential...

mayankchetan

Recently DOE feature is broken

8

## Description DOE studies are not running anymore. I tried to track down when and where it was broken, but I could not. So, I think I will need some...

yonghoonlee

Windows Debugging

1

## Purpose Figure out why Windows tests are failing ## Type of change What types of change is it? _Select the appropriate type(s) that describe this PR_ - [ ]...

dzalkind

PermissionError: 'aeroelastic' <class FASTLoadCases>: Error calling compute(), [WinError 5] Access is denied

6

c:\repo\NREL\WEIS\examples\04_NREL5MW_OC4_semi\ python weis_driver.py Using weis.aeroelasticse in rosco.toolbox... wisdem.wt ←[00m←[00m←[00m←[00m←[00m←[00m←[00mWARNING: Frequency index 0 has been used again for i=0 in the x-direction WARNING: Frequency index 3 has been used again for...

edpeca

Running Multiple OpenFAST Simulations - ROSCO_IO.f90 already opened in another unit

2

I have two .fst files, namely "NREL5MW_OC4_semi_wind_0.fst" and "NREL5MW_OC4_semi_wind_1.fst", along with their corresponding .dat files. How can I run these two cases? I tried using the method from "01_aeroelasticse", but...

saeidb71

## Description In OpenFAST-only mode, the `BlPitchF` is taken from the provided model and not set to 90 degrees for parked cases. 90 is the default, but in OpenFAST-only mode,...

dzalkind

User Defined control optimization based on 02_control_opt

3

Hello, everyone! After a period of learning and debugging, I have been able to run basic cases. But when I started user Defined control optimization based on 02_control_opt, something went...

wind2021

Cannot run examples\02_control_opt\weis_driver_sm.py

9

Hi, when I run _**weis_driver_sm.py**_ (stability_margin example), it seems that the optimization process does not been activated, and the openfast does not been used. I use the default modelling_options file...

Wying301

OpenFAST Simulation Aborted While Running 'weis_driver.py' in 'WEIS/examples/13_DTQP' Directory

4

I'm utilizing the 'develop' branch and attempted to execute 'weis_driver.py' within the 'WEIS/examples/13_DTQP' directory. However, it resulted in the following error: "Running ElastoDyn. The Nodal outputs section of the ElastoDyn...

saeidb71