Voron-2
Voron-2 copied to clipboard
VoronDesign
Voron 2 CoreXY 3D Printer design
The BOM states just a M3 threaded insert with no details and the r2 assembly manual on page 31 mentions dimensions in the BOM (which aren't there). There are so...
The manual needs 8 M3x6 BHCS for the X and Y cable chains. Both the configurator and sourcing guide say we need 6. For Chinese chains you'd need 10. The...
I can't contribute with a link, I've only bought it from a local store.
This should reduce the number of individual instances of afterburner STLs we need to upkeep. Users should get afterburner STLs from https://github.com/VoronDesign/Voron-Afterburner instead.
Checks the current printhead position against printer boundaries to determine safe direction and distance to move the printhead when the print is finished. This fixes the `Move out of range`...
On page 188 picture two (from right) shows one layer (the pcb board). Pictures 3 and 4 show two layers. I think the upper one is wrong. 
I'm pricing out a V2.4 r2 build and noticed that there's no McMaster-Carr link for the M3x6 flathead screws. Also, I noticed that there are no ISO or DIN standards...
Created a BTT Kraken Config for Voron 2.4. I assissted a Voron owner in setting up their V2.4 with Kraken and BTT EBB SB2209 using katapult. Since I was helping...
Add a speed to the PARK macro, without it the speed is random and sometimes really slow
In Voron2_Octopus_Config.cfg, and perhaps others, the default extruder min_temp is 10° C. If you store your printer in a cool, but not freezing, location, this can trip you up when...
