Voron-2
Voron-2 copied to clipboard
VoronDesign
Voron 2 CoreXY 3D Printer design
It could be that my old BOM is incorrect, but among the fasteners, there are a lot more changes than just the M3x12 SHCS and M3 Threaded Inserts that the...
The comment in the SKR1.4 cfg file uses the incorrect syntax for inverting the probe connection (at least as of current klipper). The ! and ^ were transposed. This patch...
Switch to using the `controller_fan` module for the electronics cooling fans on the SKR1.3, SKR1.4, & Spider Klipper configs. This will bring those configs inline with the electronics cooling fans...
The way the Mains Inlet and Switch are depicted on page 210 of the manual would make the printer power on by flipping the switch down instead of up. Also...
On p141 of the manual, it says to pull the belts tight. • It should also clarify here that the extra belt length should be tucked into the carriage. •...
In the manual, on page 174, there's mentioning of the toolhead pcb. I suggest that the manual adds fotnotes on where the user can get the STL's needed for mounting...
While assembling my 2.4v1 I was not thrilled with how loose the electronics bay components were on the DIN rails and I printed a number of upgraded brackets and mounts...
This was fixed on the Afterburner CAD but not the Voron-2 CAD that contains Afterburner. STLs need to be updated as well. https://github.com/VoronDesign/Voron-Afterburner/issues/15 In addition, the Probe Brackets are 4.8mm...
Filename is 'wago_221-415_mount_3x5.stl'. It will be easy for many to believe they need to print 5 copies of the part.
It is included in the sourcing guide, but missing in the BOM.
