VoldDesigns

I'm having the same issue: I have followed every instruction. Reflashed multiple times, only built with ./make_with_bdsensor.sh ... Confirmed bd_sensor.c file is in the ~/klipper/src directory, as well as the...

Hey Mark! I figured out my problem. my creality v4.2.7 board was not flashing the firmware. Since the board does not have a reset button or a way to force...

Excuse my ignorance, I know nothing about delta printers. But saw your issue and figured I'd do a little research. From what I saw with other delta configs is you...

> not 0.5 but 0.05mm that is within 0.1mm, so the problem is how to fix the first 2 data in calibration, > need to maker sure the difference between...

> seems here is the problem, the bed temperature is not stable. > >  Yes, the bed is heating up for a heat soak cycle. These examples I am...

> seems here is the problem, the bed temperature is not stable. > >  I found an instance of the bed being at 104.3-104.6C and the BDsensor decided to...

> I think I find there is a software bug here that I don't consider the z_offset. > you can try to set the z_offset to 0 in the cfg...

> In that case, I recommend you to use the real time level feature https://github.com/markniu/Bed_Distance_sensor/wiki/How-to-run-Real-Time-Level > Updated BDsensor.py and I'm running the real time leveling. Only thing I needed to...

So, I am back to square one. I am still having issues with Z_offset. The problem I am having is I need to constantly, live tune the z_offset with collision...

I just reflashed firmware with the updated bdsensor.py file. Testing now and will update you