Vivia93

Hello,Dr.Yang, Thank you very much for your answer. I have a question that I would like to ask. In the lbm_solver_3d_2phase.py file,I want to simulate gas (non wetting phase) entering...

Hello Dr. Yang, Thank you for your answer. May I ask if it is possible to calculate the saturation of the water and gas phases in the lbm_solver_3d_2phase.py file, and...

Hello Dr. Yang, I calculated the saturation of the water and gas phases, but when I reached 200 steps, I suddenly encountered an error, and the output vtk file was...

I set the viscosity of air and water separately niu_l = 0.001         #psi>0 niu_g = 0.000018         #psi

Hello,Dr.Yang, In the two-phase flow simulation, I found that you set CapA=0.005, and I reset this parameter to CapA=0.0005 during the simulation. I have noticed that the displacement speed has...

杨教授您好， 我在进行单相流模拟的时候遇到了一点问题，我将自己CT扫描得到的几何模型代入代码，几何模型尺寸为200x100x100，但是输出的图像貌似不对，您可以帮忙看一下是哪里出了问题吗？ 输出的图像： 叶落何翩翩 ***@***.***   ------------------ 原始邮件 ------------------ 发件人: "yjhp1016/taichi_LBM3D" ***@***.***>; 发送时间: 2023年8月26日(星期六) 晚上10:27 ***@***.***>; ***@***.******@***.***>; 主题: Re: [yjhp1016/taichi_LBM3D] A question about lbm_ solver_ 3d.py (Issue #18) Hi, For the first question, in...

  

杨教授， 您好。我看vtk文件输出的可视化只有密度和速度的变化，请问单相流该如何去看流体流动过程呢？

杨教授，您好！我运行了单相流的程序，为什么我运行到24步以后，突然就不行了呢？运行过程中也没有报错。