VitG
VitG
please, make standart pluto firmware (for no SDCard mode) for Libre SDR with ethernet support!
Hi! for me it is important to use the physical LAN interface as in pluto+. my LibreSDR should works remotely as a standard plutosdr.
How did you manage to do this? ifconfig shows that I have only one network interface 192.168.2.1. in the configuration file on the USB disk I specify the address for...
but from the beginning I wrote that I don't need LibreSDR mode. I need this device to start up like Pluto WITHOUT AN SD CARD. this is necessary for compatibility...
I just wanted to suggest making libreSDR more functional for more applications.
Most likely not, because the file structure in the new firmware may not fit the old patch. PS: By the way, about my question, after searching I found "0.37 dirty"...
it's because nicknames with less G were taken. and I don't want to change it just because of this ... and your nickname is great but you act like a...
VIAS actually exist, it's just a very good mask and they're not visible. Problem in wrong type of zener diode that's installed in this model and has a capacity of...
I also want to draw attention to the fact that in a cheaper version of LibreSDR known as AMGeekSDR, instead of VCTXO a regular TCXO is installed, which does not...
> How I know if my libresdr has the diode issue? > if your zener diode marked as C5 then remove it. If Z3 then everything is fine, it has...