Philipp Hörauf

schematic&layout

2

Hi there! I have taken a look at your schematic and layout, and have seen that you have created it in a kicad version older than 4.0. so i have...

some kind of TestMode missing

1

I have started to read the code and looked at the gui as well but i think there is some kind of test mode missing, where you could just start...

Error(s) in MXM driver: balancing control

1

suspect, there are two mistakes in the balancing control driver of the mxm driver. both are located in: [mxm_17852.c](https://github.com/foxBMS/foxbms-2/blob/master/src/app/driver/afe/maxim/max17852/mxm_17852.c) 1st: line 408: pState->batteryCmdBuffer.msb &= ((uint8_t)1u pState->batteryCmdBuffer.msb |= 1 enable balancing...

Send message to a Pager

9

this is kind of a fature request, because there should be all nessessary pieces of software to send a message to a pager. i have tried to send to a...