Victor-Mo

@barban-dev Maybe a bit late, but i struggled with the same issue. But i finally found what the problem is. The 'Message' field is defined as type 'any'. That basically...

I used a Moduline 30 Thermostat to create the conversion table. The raw value is reported in the '0x8A' message. If you enable 'log s' via telnet it reports the...

The raw data is only available via telnet.

Patching the ' b-2.xsd' did work for me, but it did not feel right to patch a open standards file. The underlying problem is that the message field is defined...

What happens if you try one of the pre-build binaries ? ( https://github.com/Victor-Mo/IRT-ESP/releases )

It looks like it needs to build the 'web' files first. - goto the directory ./tools/webfilesbuilder/ - run the command 'npm ci' that should install all node modules - from...

Not sure what kind of information you are looking for ? But the maximum set of information you can get is: ``` Boiler stats: Hot tap water: off Central heating:...

Hi Harry, Great stuff ! Today I have detached my github fork from the original proddy EMS build. You should now be able to create PR on my github. I...

@ZabbensX these new boards have a ESP32 onboard and not a ESP8266. Currently the iRT software is not available for the ESP32, so I am sorry to say this board...

Because the iRT bus is very sensitive, the interface board cannot work in active mode if there is also a thermostat connected. So I do not think it is possible.