VORONENTHUSIAST

This is a software issue with moonraker - when you plug your updated emmc module back into the SKIPR board, it should tell you what has been depreciated - all...

It's been worked out - google it, you'll find the answer, just not from MKS

This was the top hit on google when searching "can bus MKS SKIPR": https://klipper.discourse.group/t/mks-skipr-can-bus/5377/90 Have a read through all of it, they explain a lot of stuff, the fact you...

Oh, thought I should add - as it seems it was Klipper related and not hardware related, that's probably why MKS haven't answered - from reading the thread the board...

Is your USB cable a data cable or just power? Have you updated to the latest Klipper? This was all merged around a month ago so is definitely working -...

I'm using COMFAST CFWU810N RTL8188EUS on 2 SKIPR boards, it worked straight out of the box. They're about £2 on AliExpress From the screen shot above, I assume it's a...

I'm in the middle of upgrading manually using instructions from this link https://www.cyberciti.biz/faq/update-upgrade-debian-10-to-debian-11-bullseye/ I will let you know how it goes! **EDIT** It didn't go - I had to reinstall....

Hey guys - did any of you solve this? If not - I have! ;) I was using 22awg wire for my SKIPR adxl345 connection - BAD IDEA. I have...

I worked it out - I forgot to change my macro when I added my extra extruders.

@Shamoon78 @tanjunior Apologies, I've been away from the hobby for a while - M1 Port uses PD8 (EXP1_6) M2 uses PD10 (EXP1_4) M3 uses PE10 (EXP1_2) Please note I'm using...